Environmental changes, tree roots, improper installation, and other factors cause problems in plumbing. However, one can maintain a home plumbing system through routine preventive inspection. It keeps bigger and costly concerns from happening. We talk about the importance of whole home inspections in this article.
Contents
How Does Professional Maintenance Prevent Plumbing Leaks?
Plumbing professionals are aware of the lifespan of heaters and other water appliances. They can tell when water pressure fluctuations have caused them damage or deterioration that affect their longevity.
Another is that they can easily spot leaks. Leaks, no matter how small initially, can grow over time. A thorough inspection can prevent major infrastructure and health troubles, like a slab leaks in the home foundation or mold throughout the floorboard, in the long run.
What Does a Plumbing Inspection Consist Of?
Scheduling for routine maintenance and inspection also retains the value of a residential property. Here is what a plumbing inspection usually entails:
Water Pressure Testing
A water pressure test is done to ensure that it is not too high or too low. If it is too low, it is inconvenient for use in the shower or kitchen and signals a leak. Too high and it may break the entire plumbing system or shorten the lifespan of your washing machine, dishwasher, shower, and other hosed appliances.
A manometer comes handy for this. It is an instrument for measuring pressure in pipes.
Checking of Water and Sewer Lines
Plumbing technicians inspect pipe and sewer lines during a whole inspection. They identify which parts need to be replaced due to corrosion or which areas have kinks that keep water from flowing steadily. They may ask about your water bill to assess if it aligns with the normal cost for the household with all pipelines in good condition.
Inspection of Plumbing Fixtures and Water Heater
Faulty water heaters and fixtures pose a safety threat to an establishment. During routine inspection, plumbing professionals ensure these are:
- Not dislodged
- Well-ventilated
- Not overheating
- Not corroded or rusting
- Allowing a good flow and pressure of water
- Installed correctly
Should your fixture not meet the required safety standards, a water heater repair in Rancho Cucamonga is the solution.
Audit of Toilets for Deterioration or Worn Off Parts
A toilet tank with defective parts can cause unnecessary high water bills. It can also damage the parts that are working well. Plumbers check for leaks in the flapper valve—if it has started to lose shape and let water through even without flushing—during routine inspections.
A plumbing bowl test or colorful test is the typical test done when auditing a toilet bowl’s condition. It is done by adding a few drops of food coloring to the water in the tank. It is left for half an hour or so without flushing. If the color seeped into the bowl, then there is a leak.
Identification of Parts that Need Upgrade or Replacement
A whole plumbing inspection will list down all the parts of the water system that need replacement. The list will be based on an assessment of the entire house. Some parts or fixtures need upgrades every few years, and they will also be mentioned to you by the plumbing professional.
Inspection of Drainage and Garbage Disposal Systems
Grease, soap, hair strands, or any buildup can clog a drain. Simple home remedies like baking soda and vinegar can clear it. Such a problem and solution will also be discussed with you by the plumbing technician during inspection.
Faucet Condition and Installation Review
A faulty faucet wastes gallons of water and money on bills. It results from it being dislodged, worn out, or filled with mineral deposits. Your technician will advise you to replace it or the affected parts. Reinstallation is also an option if placement or attachment is the issue.
Checking for Gas Leaks
Gas leaks pose the risk of poisoning, fire, and explosion. They are a threat to one’s health and safety and often occur from stoves, heaters, and hot water tanks. Piping and hoses that are connected to a heating source will be inspected for these during a whole house plumbing inspection.
Spotting of Leaking Pipes
A professional plumber in Fontana or Rancho Cucamonga renders a leak detection service during a complete inspection. It is done to identify the cause and source and allow for repairs before they become worse.
Inspection of Refrigerator Water Dispenser and Ice Maker
A refrigerator with a water dispenser and icemaker will be included in a routine check. Its filters should be replaced twice each year. Otherwise, blockage or damage can block water flow.
How much does a plumbing inspection cost in the US?
Whole plumbing inspections costs $200 on average. Again, keep in mind that is the price for the assessment alone and does not include repairs. The total cost varies depending on the severity of the issue. At Bobby Blue Plumbing in Fontana, CA, you can get a quote by simply reaching out through a phone call or our website.
How often should a plumbing system be inspected?
Generally, a whole plumbing inspection should be done at least once every two years. This is so as most parts tend to deteriorate due to extremes of weather and other factors within the said period. Old houses or buildings, however, are best inspected every year as their fixtures tend to be made from outdated materials or have experienced more wearing off throughout the years.
Find Plumbers in Rancho Cucamonga and Fontana
Finding a leak in your house plumbing can be worrisome and, at times, scary. For peace of mind, safety, and to keep the water bill from reaching an all-time high, it is best addressed right away. Professionals like Bobby Blue Plumbing have the expertise to recognize pipeline problems.
Our repair and maintenance program is rendered by experienced and licensed technicians. We also offer emergency services for plumbing issues that need immediate attention. Give us a call at (909) 944-8999. We are open on weekdays from 8am to 5pm.
Leave a Reply
You must be logged in to post a comment.